Material: Cold Rolled Steel Sheet
Steel Thickness: Enclosure body, Mounting Plate, and Door Panel Thickness: 2 mm.
Finished Surface: 1. Enclosure body: Polyester Powder Coated with RAL 7032
  2. Mounting Plate: Polyester Powder Coated with RAL 2001
  3. Any other requirements: Hot-Dip Galvanized and etc.
Supply Includes: 1. Mounting Plate: 2 mm. thickness
  2. Earth Stud
  3. Document Pouch inside the front door panel
Technical Data: 1. Welded Assembly
  2. The front lip of the enclosure is folded to provide rigidity and to form a gutter that prevent
  liquids from the gasket
  3. Multi-folded prevents the ingress of dust and spraying of water when the door panel opens
  4. Special sealed around door panel
  5. Door opens up to 120 degrees
  6. Doors are provided with TAMCO Lock
Protection Rating: IP65
Enclosure Solution
Welded Enclosure
          CX is an enclosure with all welding assembly to strengthen and prevent dust and liquids to ingress into the enclosure. It is made of cold rolled steel sheet with 2 mm. thickness for enclosure body, mounting plate and door panel.
          The front lip of the enclosure is folded to provide rigidity and to form a gutter that prevent liquids from the gasket. It can protect the electrical equipment inside the enclosure.
          The enclosure has an orange mounting plate and a document pouch inside the front door panel. The International Protection rating is IP65. There are 4 standard sizes.
CX IP65 Welded Assembly Series